Redefining how we quantify printer resolution

by Sam Hobish - Apr 22, 2016 8:16:05 AM

We often make the mistake of using hardware specs for determining a printer’s quality.  That is, when we refer to a machine’s resolution, what we are really saying is what the manufacturer has told us about the quality of its components.  For a laser-based printer, that would be beam diameter and for a DLP printer, that would be number of pixels in the projector.  Instead, what we should be looking at is the quality of the actual prints that come from any given machine.  Rather than determining a machine’s quality based on product descriptions, we should measure the smallest (positive and negative) features it can print.

Swiper Kits now available for purchase

by Sam Hobish - Mar 14, 2016 1:25:00 PM

We’ve been using swiper kits in our R&D lab for a while, but we are now finally offering them for purchase on the Ember Store

Announcing High Speed Printing on Ember

by Sam Hobish - Mar 9, 2016 9:41:50 AM

Last week, we invited members of the media and the greater Autodesk community to check out some experiments we've been working on in the Ember lab.  

Introducing CMYK + W Resin

by Sam Hobish - Dec 14, 2015 1:13:00 PM

CMYK + W resins for the Ember 3D Printer are now available, giving you the ability to mix and match resins to customize your color palette. 

Autodesk Standard Clear Resin is now Open Source

by Eric Wilhelm - Mar 12, 2015 8:30:00 AM

The Ember 3D printer ships with 2 liters of our Standard Clear Prototyping resin. We affectionately call it PR48, which stands for polar resin number 48. Like WD-40, is this our 48th try for a polar resin formulation? Close enough. Today we're sharing the formulation of PR48 under a Creative Commons Attribution-ShareAlike license, the same license Arduino uses to share their design files. We're explicitly inviting you to understand, remix, and remake our resin.

 

PR48 is for sale on the Ember website. Buying it from us will probably be the easiest way to get more, but if you want to make your own for any reason (and are experienced with resin formulation, or perhaps just chemical handling) you can do so.

We're open sourcing our resin for a couple of reasons:

  1. We have an open approach, and encourage the use of 3rd-party materials in our printer and the development of new materials on our platform. We include 3rd-party materials in the defaults for Ember's online model preparation and slicer, and are adding more as we optimize their settings for Ember: you can check them out at emberprinter.com. (You don't actually need an Ember to use the site.) This Instructable describes how to test new resins.
  2. Autodesk is thinking differently about 3D printing, and sharing under an Attribution-ShareAlike license reflects our commitment.
  3. Open sourcing our resin formulation is only the first step in the journey of opening our 3D printer and our Spark 3D printing platform.

 

We think PR48 is a pretty good resin: it properly adheres to the build head, photopolymerizes at a reasonable rate, clouds Ember's PDMS window significantly less than other resins, and generally works for most prints. But it's a starting point, and not specially optimized for anything. We're inviting you to understand how it works, make changes, make it better, and share those changes. Maybe you can make something awesome in fewer than 48 tries?